Official Supplier Data: Affinity Water • DWI & BS 7593 Standards
Water Hardness in CO7
Official water quality verdict for outcode CO7: classified as Hard Water (293.3 PPM), supplied and treated by Affinity Water across 6 sectors.
Rating: Hard Water293.3 PPM • 20.5° ClarkSupplier: Affinity Water+47% above UK average
Outcode Mean Hardness293.3 PPM20.5° Clark • Hard Water29.3°fH • 16.4°dH
Outcode CO7 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode CO7 is officially classified as hard water, averaging 293.3 PPM (mg/L CaCO₃) or 20.5° Clark, supplied and treated by Affinity Water across all 6 postcode sectors (1,338 postcodes). Readings range from 290 PPM (CO7 0) to 310 PPM (CO7 6), showing a local disparity of 20 PPM.
☕ Kettle & Tea Quality:
Rapid limescale buildup in kettles with floating scum on your cuppa. Descale monthly using white vinegar or food-grade citric acid.
🚿 Skin & Bathing:
High calcium levels can aggravate dry skin & eczema sensitivity. Soap lathers less easily, often leaving a tight feeling after hot showers.
🍽️ Appliances & Salt:
Keep water softener salt topped up and calibrate dishwashers to H04 – H05. Protect combi boiler heat exchangers under BS 7593.
Local Installer Quote Network
Living in a Hard Water Zone (CO7 averages 293.3 PPM)? Compare Approved Local Installers
Get up to 3 free, no-obligation quotes from WRAS-approved water softener installers and heating engineers serving Affinity Water.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark+47% Hardervs 200 PPM national average
Water hardness isn't identical across every street in CO7—there is a 20 PPM variance between neighborhoods. Residents in sector CO7 0 enjoy the softest water at 290 PPM, whereas taps in sector CO7 6 register the highest mineral load at 310 PPM. This localized disparity occurs because Affinity Water blends supplies from different boreholes, rivers, and storage reservoirs depending on elevation and seasonal demand.
The reason tap water in CO7 carries significant dissolved minerals lies in local geology. Affinity Water abstracts substantial water supplies from subterranean chalk and limestone aquifers. As rainwater percolates through deep calcium-rich rock strata over decades, it dissolves natural calcium carbonate. While entirely safe and wholesome under Drinking Water Inspectorate (DWI) standards, these minerals precipitate out when heated above 60°C, leaving stubborn limescale deposits on heating coils.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode CO7
Based on 293.3 PPM mineral saturation (Hard Water), operating heating appliances across CO7's 1,338 households carries distinct annual economic consequences:
Extra Combi Boiler Gas Cost£130 – £190
Thermal heating transfer resistance caused by 1mm–1.5mm calcium carbonate build-up on heat exchangers.
Dishwasher Salt Requirement10 – 14 kg
Essential ion-exchange resin bed regeneration salt required to avoid glass clouding and element burnout.
Q: What is the average water hardness in outcode CO7?
Tap water across outcode CO7 averages 293.3 PPM (mg/L), which equals 20.5° Clark, 29.3°fH, or 16.4°dH. It is officially classified as hard water water supplied by Affinity Water.
Q: Is water in CO7 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 293.3 PPM, water in outcode CO7 is 47% harder than the national benchmark.
Q: What dishwasher salt setting is recommended for CO7?
For Bosch, Siemens, and Neff dishwashers in outcode CO7 (293.3 PPM), the recommended softener setting is H04 – H05.
Q: Who manages the municipal water supply in outcode CO7?
Public tap water infrastructure across all 6 sectors in outcode CO7 is distributed and monitored by Affinity Water.
All Postcode Sectors in CO7
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.