Water Hardness in Sector TA13 5

Water Supply Zone Report • Distribution Area Managed by Wessex Water

Water Quality Summary: Sector TA13 5

✓ Verified Zone-Level Data (DWI / Defra)
Average Mineral PPM290 PPMHard
English Clark Scale20.3 °Clark29.0 °fH • 16.2 °dH
Boiler Heat Loss10% – 15%Est. thermal efficiency drag
Bosch Dishwasher SettingH04Softener salt required
Direct Answer & Quick Diagnostic

Tap water in postcode sector TA13 5 has an average water hardness of 290 PPM (mg/L CaCO₃), which equals 20.3° Clark (29.0°fH / 16.2°dH). Classified as hard water distributed by Wessex Water, domestic dishwashers require setting H04 and combi boilers face an estimated thermal efficiency drag of 10% – 15% without scale protection.

Comprehensive Hydro-Geological Analysis

Water Hardness Breakdown for Sector TA13 5

According to regional catchment disclosures for TA13 5, municipal tap water managed by Wessex Water presents a mineral density of 290 PPM (20.3 English degrees). This data covers approximately 145 residential and commercial addresses in the TA13 area.

Registering 290 PPM, tap water across TA13 5's 145 postcodes carries significant calcium concentrations. Uninhibited hot water use accelerates limescale deposits on heating elements, potentially causing a 10% – 15% loss in boiler heat transfer efficiency over prolonged operating cycles.

Water quality in TA13 5 is monitored continuously under the Water Supply (Water Quality) Regulations. Environmental testing ensures that the 290 PPM mineral density supplied by Wessex Water remains compliant with all Drinking Water Inspectorate (DWI) parameters.

Bathing and laundering across the 145 postcodes of TA13 5 is influenced by the 290 PPM mineral density. Surfactants in shampoos and detergents interact with calcium salts, requiring +35% extra laundry detergent to overcome calcium neutralization to achieve thorough cleansing and preserve fabric softness.

Correct softener regeneration is critical when running appliances on 290 PPM water in TA13 5. Setting your dishwasher to H04 optimizes salt consumption while ensuring spot-free drying results across TA13.

Standardized Water Chemistry Metrics

Water Hardness Measurement Conversions for Sector TA13 5

Standardised unit equivalents used across British plumbing standards (BS 7593), European appliance manuals, and water testing:

Measurement ScaleSymbol / StandardValue in TA13 5
Parts Per Million (UK/US standard)PPM / mg/L CaCO₃290 PPM
English Clark Degrees°Clark / °e20.3 °Clark
French Degrees°fH29.0 °fH
German Degrees (General Hardness)°dH / dGH16.2 °dH
Millimoles Per Litremmol/L2.90 mmol/L
Grains Per Gallon (US)gpg16.9 gpg
NP
Updated: 11 July 2025 • DWI & Defra Compliant DataNguyễn Hạc Phong • Lead Water Data Engineer
Drinking Water Inspectorate (DWI)
Water Hardness Level

290 PPM (mg/L)

20.3 °ClarkHard
0 PPM (Soft)100 PPM200 PPM (Hard)300+ PPM (Very Hard)
Water supplied by Wessex Water in TA13 5 is categorized as Hard. High mineral content causes rapid limescale build-up on heating elements and appliances.
Dishwasher Setup Guide

Exact Water Softener Setting for TA13 5

Select your dishwasher brand to get the manufacturer-recommended salt setting for this area.

Recommended Setting:H04
⚠️ Dishwasher salt is required to prevent cloudy glasses and internal scale buildup.
Boiler Efficiency Loss~12%Extra energy cost per year
Limescale Formation RiskHighOn taps, kettles & showers
Detergent Needed+30% DoseFor laundry & dishwashing
Recommended Solutions

Protect Your Appliances in TA13 5

Essential

Dishwasher Regeneration Salt

Prevents limescale buildup in water softeners and stops cloudy film on glassware.

Check Price on Amazon
Skin & Hair Protection

Shower Head Water Filter

Reduces chlorine & hard minerals to protect against dry skin, eczema, and hair damage.

Check Shower Filters
Maintenance

Appliance Descaler Tablets

Quickly dissolves limescale deposits inside kettles, coffee machines, and washing machines.

View Descalers
Frequently Asked Questions

Water Hardness FAQs for Sector TA13 5

Q: What is the official water hardness level in sector TA13 5?

Tap water in sector TA13 5 has an average mineral density of 290 PPM (mg/L), which equals 20.3° Clark, 29.0°fH, or 16.2°dH. It is officially categorized as hard water supplied by Wessex Water.

Q: What dishwasher water softener setting is needed for TA13 5?

For Bosch, Siemens, and Neff dishwashers in sector TA13 5 (290 PPM), the recommended softener setting is H04. Beko models typically require Level 3 or 4.

Q: Will hard water damage central heating boilers in TA13 5?

Yes. At 290 PPM, calcium carbonate precipitation will build scale layers on heating elements over time, potentially reducing boiler heat transfer efficiency by 10% – 15% without proper filtration or descaling.

Q: Who is the regulated water supplier for sector TA13 5?

Mains water across postcode sector TA13 5 is distributed and monitored by Wessex Water in accordance with Drinking Water Inspectorate (DWI) quality standards.

Curious how Sector TA13 5 compares?

Compare your local mineral PPM, boiler efficiency risks, and appliance settings directly against Central London (SW1A 1).

Compare vs London (SW1A 1) →