Official water quality verdict for outcode SY23: classified as Moderately Hard Water (140 PPM), supplied and treated by Hafren Dyfrdwy across 6 sectors.
Rating: Moderately Hard Water140 PPM • 9.8° ClarkSupplier: Hafren Dyfrdwy-30% below UK average
Outcode Mean Hardness140 PPM9.8° Clark • Moderately Hard Water14.0°fH • 7.8°dH
Outcode SY23 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode SY23 is officially classified as moderately hard water, averaging 140 PPM (mg/L CaCO₃) or 9.8° Clark, supplied and treated by Hafren Dyfrdwy across all 6 postcode sectors (984 postcodes). Readings range from 140 PPM (SY23 1) to 140 PPM (SY23 9) with consistent mineral levels throughout.
☕ Kettle & Tea Quality:
Gradual chalky ring forms in kettles over 2–3 months. Descale quarterly with citric acid crystals to keep heating elements clean.
🚿 Skin & Bathing:
Moderate mineral content is generally gentle on skin, producing normal lather with everyday soaps and shampoos.
🍽️ Appliances & Salt:
Set dishwashers to H02 – H03 to avoid cloudy glassware, and check boiler inhibitor levels at your annual service.
Local Installer Quote Network
Protect Your Heating & Appliances in SY23 (140 PPM): Compare Local Specialists
Connect with certified local plumbers for limescale management and British Standard BS 7593 heating system protection in Hafren Dyfrdwy.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark-30% Softervs 200 PPM national average
Serving 984 homes and businesses across outcode SY23, mains tap water supplied by Hafren Dyfrdwy registers an average mineral density of 140 PPM (14.0°fH / 7.8°dH). Rated as moderately hard water, local water hardness determines how well laundry detergents lather, the rate of scale accumulation in combi boilers, and whether sensitive skin or eczema flares up after showers.
Water hardness is remarkably consistent across all 6 sectors of SY23, with readings holding steady at 140 PPM from SY23 1 through to SY23 9. This uniform profile means every household on the Hafren Dyfrdwy network in this zone shares the same appliance settings and kettle descaling routine.
Treated in strict compliance with Drinking Water Inspectorate (DWI) standards, tap water in SY23 maintains an average mineral density of 140 PPM, ensuring consistent municipal distribution and wholesome tap drinking water from Hafren Dyfrdwy.
With moderate water hardness (140 PPM) in SY23, kettles and showerheads build a light white chalk ring every 2–3 months. A quick rinse with warm water and white vinegar or food-grade citric acid crystals clears the element in minutes. To prevent cloudy glassware, maintain your dishwasher salt top-up set to H02 – H03. Combi boilers also benefit from regular inhibitor checks during annual boiler servicing in line with British Standard BS 7593.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode SY23
Based on 140 PPM mineral saturation (Moderately Hard Water), operating heating appliances across SY23's 984 households carries distinct annual economic consequences:
Tap water throughout outcode SY23 is supplied from a unified distribution network managed by Hafren Dyfrdwy. With all 6 sectors presenting an identical mineral concentration of 140 PPM, households across all 984 postcodes share uniform limescale risk profiles and identical appliance salt calibrations (H02 – H03).
Frequently Asked Questions: Water in Outcode SY23
Q: What is the average water hardness in outcode SY23?
Tap water across outcode SY23 averages 140 PPM (mg/L), which equals 9.8° Clark, 14.0°fH, or 7.8°dH. It is officially classified as moderately hard water water supplied by Hafren Dyfrdwy.
Q: Is water in SY23 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 140 PPM, water in outcode SY23 is 30% softer than the national benchmark.
Q: What dishwasher salt setting is recommended for SY23?
For Bosch, Siemens, and Neff dishwashers in outcode SY23 (140 PPM), the recommended softener setting is H02 – H03.
Q: Who manages the municipal water supply in outcode SY23?
Public tap water infrastructure across all 6 sectors in outcode SY23 is distributed and monitored by Hafren Dyfrdwy.
All Postcode Sectors in SY23
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.