Official Supplier Data: Essex and Suffolk Water • DWI & BS 7593 Standards
Water Hardness in SS17
Official water quality verdict for outcode SS17: classified as Very Hard Water (320 PPM), supplied and treated by Essex and Suffolk Water across 5 sectors.
Rating: Very Hard Water320 PPM • 22.4° ClarkSupplier: Essex and Suffolk Water+60% above UK average
Outcode Mean Hardness320 PPM22.4° Clark • Very Hard Water32.0°fH • 17.9°dH
Outcode SS17 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode SS17 is officially classified as very hard water, averaging 320 PPM (mg/L CaCO₃) or 22.4° Clark, supplied and treated by Essex and Suffolk Water across all 5 postcode sectors (784 postcodes). Readings range from 320 PPM (SS17 0) to 320 PPM (SS17 9) with consistent mineral levels throughout.
☕ Kettle & Tea Quality:
Rapid limescale buildup in kettles with floating scum on your cuppa. Descale monthly using white vinegar or food-grade citric acid.
🚿 Skin & Bathing:
High calcium levels can aggravate dry skin & eczema sensitivity. Soap lathers less easily, often leaving a tight feeling after hot showers.
🍽️ Appliances & Salt:
Keep water softener salt topped up and calibrate dishwashers to H06 – H07 (Max salt). Protect combi boiler heat exchangers under BS 7593.
Local Installer Quote Network
Living in a Hard Water Zone (SS17 averages 320 PPM)? Compare Approved Local Installers
Get up to 3 free, no-obligation quotes from WRAS-approved water softener installers and heating engineers serving Essex and Suffolk Water.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark+60% Hardervs 200 PPM national average
Statistical distribution across all 5 postcode sectors and 784 delivery points under Essex and Suffolk Water's catchment monitoring:
Analyzed Sectors5784 postcodes
PPM Spread (Min - Max)320 – 320Variance: 0 PPM
Predominant ZoneVery Hard Water100% hard/very hard
Regulating AuthorityEssex and Suffolk WaterDWI Regulated Supply
Hydro Metric
Outcode SS17 Level
UK National Reference
Regional Status
Mean Mineral Density
320 PPM (22.4 °Clark)
200 PPM (14.0 °Clark)
+60% above baseline
French & German Scale
32.0 °fH / 17.9 °dH
20.0 °fH / 11.2 °dH
European standard conversion
Catchment Uniformity
Uniform (Single primary source)
Regional blending standard
Single Water Zone
Dishwasher Salt Calibration
H06 – H07 (Max salt)
Bosch H03 / Beko Level 2
Salt required
Regional Hydro-Geological Overview
Water Hardness Breakdown: Outcode SS17
Serving 784 homes and businesses across outcode SS17, mains tap water supplied by Essex and Suffolk Water registers an average mineral density of 320 PPM (32.0°fH / 17.9°dH). Rated as very hard water, local water hardness determines how well laundry detergents lather, the rate of scale accumulation in combi boilers, and whether sensitive skin or eczema flares up after showers.
Water hardness is remarkably consistent across all 5 sectors of SS17, with readings holding steady at 320 PPM from SS17 0 through to SS17 9. This uniform profile means every household on the Essex and Suffolk Water network in this zone shares the same appliance settings and kettle descaling routine.
Treated in strict compliance with Drinking Water Inspectorate (DWI) standards, tap water in SS17 maintains an average mineral density of 320 PPM, ensuring consistent municipal distribution and wholesome tap drinking water from Essex and Suffolk Water.
Hard water in SS17 (320 PPM) often causes a cloudy scum on hot drinks and makes soap harder to lather, aggravating dry skin and eczema sensitivity after hot baths. For appliances, ensure regular water softener salt top-ups and calibrate your dishwasher to H06 – H07 (Max salt) to avoid cloudy glassware, white streaks, and heating element burnout across all 784 postcodes.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode SS17
Based on 320 PPM mineral saturation (Very Hard Water), operating heating appliances across SS17's 784 households carries distinct annual economic consequences:
Extra Combi Boiler Gas Cost£190 – £260
Thermal heating transfer resistance caused by 1mm–1.5mm calcium carbonate build-up on heat exchangers.
Dishwasher Salt Requirement14 – 18 kg
Essential ion-exchange resin bed regeneration salt required to avoid glass clouding and element burnout.
Heating Element Degradation18% – 25%+ thermal drag
-40% to -50% life reduction without water softening.
Tap water throughout outcode SS17 is supplied from a unified distribution network managed by Essex and Suffolk Water. With all 5 sectors presenting an identical mineral concentration of 320 PPM, households across all 784 postcodes share uniform limescale risk profiles and identical appliance salt calibrations (H06 – H07 (Max salt)).
Frequently Asked Questions: Water in Outcode SS17
Q: What is the average water hardness in outcode SS17?
Tap water across outcode SS17 averages 320 PPM (mg/L), which equals 22.4° Clark, 32.0°fH, or 17.9°dH. It is officially classified as very hard water water supplied by Essex and Suffolk Water.
Q: Is water in SS17 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 320 PPM, water in outcode SS17 is 60% harder than the national benchmark.
Q: What dishwasher salt setting is recommended for SS17?
For Bosch, Siemens, and Neff dishwashers in outcode SS17 (320 PPM), the recommended softener setting is H06 – H07 (Max salt).
Q: Who manages the municipal water supply in outcode SS17?
Public tap water infrastructure across all 5 sectors in outcode SS17 is distributed and monitored by Essex and Suffolk Water.
All Postcode Sectors in SS17
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.