Official Supplier Data: SES Water • DWI & BS 7593 Standards
Water Hardness in RH77
Official water quality verdict for outcode RH77: classified as Hard Water (260 PPM), supplied and treated by SES Water across 1 sectors.
Rating: Hard Water260 PPM • 18.2° ClarkSupplier: SES Water+30% above UK average
Outcode Mean Hardness260 PPM18.2° Clark • Hard Water26.0°fH • 14.6°dH
Outcode RH77 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode RH77 is officially classified as hard water, averaging 260 PPM (mg/L CaCO₃) or 18.2° Clark, supplied and treated by SES Water across all 1 postcode sectors (16 postcodes). Readings range from 260 PPM (RH77 1) to 260 PPM (RH77 1) with consistent mineral levels throughout.
☕ Kettle & Tea Quality:
Rapid limescale buildup in kettles with floating scum on your cuppa. Descale monthly using white vinegar or food-grade citric acid.
🚿 Skin & Bathing:
High calcium levels can aggravate dry skin & eczema sensitivity. Soap lathers less easily, often leaving a tight feeling after hot showers.
🍽️ Appliances & Salt:
Keep water softener salt topped up and calibrate dishwashers to H04 – H05. Protect combi boiler heat exchangers under BS 7593.
Local Installer Quote Network
Living in a Hard Water Zone (RH77 averages 260 PPM)? Compare Approved Local Installers
Get up to 3 free, no-obligation quotes from WRAS-approved water softener installers and heating engineers serving SES Water.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark+30% Hardervs 200 PPM national average
Statistical distribution across all 1 postcode sectors and 16 delivery points under SES Water's catchment monitoring:
Analyzed Sectors116 postcodes
PPM Spread (Min - Max)260 – 260Variance: 0 PPM
Predominant ZoneHard Water100% hard/very hard
Regulating AuthoritySES WaterDWI Regulated Supply
Hydro Metric
Outcode RH77 Level
UK National Reference
Regional Status
Mean Mineral Density
260 PPM (18.2 °Clark)
200 PPM (14.0 °Clark)
+30% above baseline
French & German Scale
26.0 °fH / 14.6 °dH
20.0 °fH / 11.2 °dH
European standard conversion
Catchment Uniformity
Uniform (Single primary source)
Regional blending standard
Single Water Zone
Dishwasher Salt Calibration
H04 – H05
Bosch H03 / Beko Level 2
Salt required
Regional Hydro-Geological Overview
Water Hardness Breakdown: Outcode RH77
Serving 16 homes and businesses across outcode RH77, mains tap water supplied by SES Water registers an average mineral density of 260 PPM (26.0°fH / 14.6°dH). Rated as hard water, local water hardness determines how well laundry detergents lather, the rate of scale accumulation in combi boilers, and whether sensitive skin or eczema flares up after showers.
Water hardness is remarkably consistent across all 1 sectors of RH77, with readings holding steady at 260 PPM from RH77 1 through to RH77 1. This uniform profile means every household on the SES Water network in this zone shares the same appliance settings and kettle descaling routine.
Treated in strict compliance with Drinking Water Inspectorate (DWI) standards, tap water in RH77 maintains an average mineral density of 260 PPM, ensuring consistent municipal distribution and wholesome tap drinking water from SES Water.
Hard water in RH77 (260 PPM) often causes a cloudy scum on hot drinks and makes soap harder to lather, aggravating dry skin and eczema sensitivity after hot baths. For appliances, ensure regular water softener salt top-ups and calibrate your dishwasher to H04 – H05 to avoid cloudy glassware, white streaks, and heating element burnout across all 16 postcodes.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode RH77
Based on 260 PPM mineral saturation (Hard Water), operating heating appliances across RH77's 16 households carries distinct annual economic consequences:
Extra Combi Boiler Gas Cost£130 – £190
Thermal heating transfer resistance caused by 1mm–1.5mm calcium carbonate build-up on heat exchangers.
Dishwasher Salt Requirement10 – 14 kg
Essential ion-exchange resin bed regeneration salt required to avoid glass clouding and element burnout.
Tap water throughout outcode RH77 is supplied from a unified distribution network managed by SES Water. With sector RH77 1 presenting an identical mineral concentration of 260 PPM, households across all 16 postcodes share uniform limescale risk profiles and identical appliance salt calibrations (H04 – H05).
Frequently Asked Questions: Water in Outcode RH77
Q: What is the average water hardness in outcode RH77?
Tap water across outcode RH77 averages 260 PPM (mg/L), which equals 18.2° Clark, 26.0°fH, or 14.6°dH. It is officially classified as hard water water supplied by SES Water.
Q: Is water in RH77 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 260 PPM, water in outcode RH77 is 30% harder than the national benchmark.
Q: What dishwasher salt setting is recommended for RH77?
For Bosch, Siemens, and Neff dishwashers in outcode RH77 (260 PPM), the recommended softener setting is H04 – H05.
Q: Who manages the municipal water supply in outcode RH77?
Public tap water infrastructure across all 1 sectors in outcode RH77 is distributed and monitored by SES Water.
All Postcode Sectors in RH77
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.