Water Hardness in Sector RH19 2

Water Supply Zone Report • Distribution Area Managed by SES Water

Water Quality Summary: Sector RH19 2

✓ Verified Zone-Level Data (DWI / Defra)
Average Mineral PPM260 PPMHard
English Clark Scale18.2 °Clark26.0 °fH • 14.6 °dH
Boiler Heat Loss10% – 15%Est. thermal efficiency drag
Bosch Dishwasher SettingH04Softener salt required
Direct Answer & Quick Diagnostic

Tap water in postcode sector RH19 2 has an average water hardness of 260 PPM (mg/L CaCO₃), which equals 18.2° Clark (26.0°fH / 14.6°dH). Classified as hard water distributed by SES Water, domestic dishwashers require setting H04 and combi boilers face an estimated thermal efficiency drag of 10% – 15% without scale protection.

Comprehensive Hydro-Geological Analysis

Water Hardness Breakdown for Sector RH19 2

According to regional catchment disclosures for RH19 2, municipal tap water managed by SES Water presents a mineral density of 260 PPM (18.2 English degrees). This data covers approximately 238 residential and commercial addresses in the RH19 area.

Registering 260 PPM, tap water across RH19 2's 238 postcodes carries significant calcium concentrations. Uninhibited hot water use accelerates limescale deposits on heating elements, potentially causing a 10% – 15% loss in boiler heat transfer efficiency over prolonged operating cycles.

Water quality in RH19 2 is monitored continuously under the Water Supply (Water Quality) Regulations. Environmental testing ensures that the 260 PPM mineral density supplied by SES Water remains compliant with all Drinking Water Inspectorate (DWI) parameters.

Bathing and laundering across the 238 postcodes of RH19 2 is influenced by the 260 PPM mineral density. Surfactants in shampoos and detergents interact with calcium salts, requiring +35% extra laundry detergent to overcome calcium neutralization to achieve thorough cleansing and preserve fabric softness.

Correct softener regeneration is critical when running appliances on 260 PPM water in RH19 2. Setting your dishwasher to H04 optimizes salt consumption while ensuring spot-free drying results across RH19.

Standardized Water Chemistry Metrics

Water Hardness Measurement Conversions for Sector RH19 2

Standardised unit equivalents used across British plumbing standards (BS 7593), European appliance manuals, and water testing:

Measurement ScaleSymbol / StandardValue in RH19 2
Parts Per Million (UK/US standard)PPM / mg/L CaCO₃260 PPM
English Clark Degrees°Clark / °e18.2 °Clark
French Degrees°fH26.0 °fH
German Degrees (General Hardness)°dH / dGH14.6 °dH
Millimoles Per Litremmol/L2.60 mmol/L
Grains Per Gallon (US)gpg15.2 gpg
NP
Updated: 3 October 2025 • DWI & Defra Compliant DataNguyễn Hạc Phong • Lead Water Data Engineer
Drinking Water Inspectorate (DWI)
Water Hardness Level

260 PPM (mg/L)

18.2 °ClarkHard
0 PPM (Soft)100 PPM200 PPM (Hard)300+ PPM (Very Hard)
Water supplied by SES Water in RH19 2 is categorized as Hard. High mineral content causes rapid limescale build-up on heating elements and appliances.
Dishwasher Setup Guide

Exact Water Softener Setting for RH19 2

Select your dishwasher brand to get the manufacturer-recommended salt setting for this area.

Recommended Setting:H04
⚠️ Dishwasher salt is required to prevent cloudy glasses and internal scale buildup.
Boiler Efficiency Loss~12%Extra energy cost per year
Limescale Formation RiskHighOn taps, kettles & showers
Detergent Needed+30% DoseFor laundry & dishwashing
Recommended Solutions

Protect Your Appliances in RH19 2

Essential

Dishwasher Regeneration Salt

Prevents limescale buildup in water softeners and stops cloudy film on glassware.

Check Price on Amazon
Skin & Hair Protection

Shower Head Water Filter

Reduces chlorine & hard minerals to protect against dry skin, eczema, and hair damage.

Check Shower Filters
Maintenance

Appliance Descaler Tablets

Quickly dissolves limescale deposits inside kettles, coffee machines, and washing machines.

View Descalers
Frequently Asked Questions

Water Hardness FAQs for Sector RH19 2

Q: What is the official water hardness level in sector RH19 2?

Tap water in sector RH19 2 has an average mineral density of 260 PPM (mg/L), which equals 18.2° Clark, 26.0°fH, or 14.6°dH. It is officially categorized as hard water supplied by SES Water.

Q: What dishwasher water softener setting is needed for RH19 2?

For Bosch, Siemens, and Neff dishwashers in sector RH19 2 (260 PPM), the recommended softener setting is H04. Beko models typically require Level 3 or 4.

Q: Will hard water damage central heating boilers in RH19 2?

Yes. At 260 PPM, calcium carbonate precipitation will build scale layers on heating elements over time, potentially reducing boiler heat transfer efficiency by 10% – 15% without proper filtration or descaling.

Q: Who is the regulated water supplier for sector RH19 2?

Mains water across postcode sector RH19 2 is distributed and monitored by SES Water in accordance with Drinking Water Inspectorate (DWI) quality standards.

Other Postcode Sectors in RH19

Explore water hardness and limescale risks in neighbouring areas within RH19

Sector RH19 1270 PPM (Hard)
Sector RH19 3270 PPM (Hard)
Sector RH19 4270 PPM (Hard)
Sector RH19 9270 PPM (Hard)

Curious how Sector RH19 2 compares?

Compare your local mineral PPM, boiler efficiency risks, and appliance settings directly against Central London (SW1A 1).

Compare vs London (SW1A 1) →