Official Supplier Data: South East Water • DWI & BS 7593 Standards
Water Hardness in RG24
Official water quality verdict for outcode RG24: classified as Hard Water (270 PPM), supplied and treated by South East Water across 4 sectors.
Rating: Hard Water270 PPM • 18.9° ClarkSupplier: South East Water+35% above UK average
Outcode Mean Hardness270 PPM18.9° Clark • Hard Water27.0°fH • 15.1°dH
Outcode RG24 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode RG24 is officially classified as hard water, averaging 270 PPM (mg/L CaCO₃) or 18.9° Clark, supplied and treated by South East Water across all 4 postcode sectors (897 postcodes). Readings range from 270 PPM (RG24 4) to 270 PPM (RG24 9) with consistent mineral levels throughout.
☕ Kettle & Tea Quality:
Rapid limescale buildup in kettles with floating scum on your cuppa. Descale monthly using white vinegar or food-grade citric acid.
🚿 Skin & Bathing:
High calcium levels can aggravate dry skin & eczema sensitivity. Soap lathers less easily, often leaving a tight feeling after hot showers.
🍽️ Appliances & Salt:
Keep water softener salt topped up and calibrate dishwashers to H04 – H05. Protect combi boiler heat exchangers under BS 7593.
Local Installer Quote Network
Living in a Hard Water Zone (RG24 averages 270 PPM)? Compare Approved Local Installers
Get up to 3 free, no-obligation quotes from WRAS-approved water softener installers and heating engineers serving South East Water.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark+35% Hardervs 200 PPM national average
Statistical distribution across all 4 postcode sectors and 897 delivery points under South East Water's catchment monitoring:
Analyzed Sectors4897 postcodes
PPM Spread (Min - Max)270 – 270Variance: 0 PPM
Predominant ZoneHard Water100% hard/very hard
Regulating AuthoritySouth East WaterDWI Regulated Supply
Hydro Metric
Outcode RG24 Level
UK National Reference
Regional Status
Mean Mineral Density
270 PPM (18.9 °Clark)
200 PPM (14.0 °Clark)
+35% above baseline
French & German Scale
27.0 °fH / 15.1 °dH
20.0 °fH / 11.2 °dH
European standard conversion
Catchment Uniformity
Uniform (Single primary source)
Regional blending standard
Single Water Zone
Dishwasher Salt Calibration
H04 – H05
Bosch H03 / Beko Level 2
Salt required
Regional Hydro-Geological Overview
Water Hardness Breakdown: Outcode RG24
Tired of stubborn limescale buildup in your kettle or dealing with an unappetising film of scum on your morning cuppa? Tap water across all 4 postcode sectors in outcode RG24 (covering 897 homes) averages 270 PPM (18.9° Clark). Maintained and distributed by South East Water, this places the district firmly into the hard water bracket—approximately 35% harder than the UK national baseline (200 PPM).
Water hardness is remarkably consistent across all 4 sectors of RG24, with readings holding steady at 270 PPM from RG24 4 through to RG24 9. This uniform profile means every household on the South East Water network in this zone shares the same appliance settings and kettle descaling routine.
The reason tap water in RG24 carries significant dissolved minerals lies in local geology. South East Water abstracts substantial water supplies from subterranean chalk and limestone aquifers. As rainwater percolates through deep calcium-rich rock strata over decades, it dissolves natural calcium carbonate. While entirely safe and wholesome under Drinking Water Inspectorate (DWI) standards, these minerals precipitate out when heated above 60°C, leaving stubborn limescale deposits on heating coils.
With tap water averaging 270 PPM in outcode RG24, proactive limescale prevention is essential. Expect rapid limescale buildup in kettles—monthly descaling with white vinegar or food-grade citric acid crystals keeps the heating base efficient and stops chalky flakes falling into your tea. Combi boiler heat exchangers are also susceptible to scale encrustation, which can increase annual gas heating bills by 10% – 15% without inline scale protection under British Standard BS 7593.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode RG24
Based on 270 PPM mineral saturation (Hard Water), operating heating appliances across RG24's 897 households carries distinct annual economic consequences:
Extra Combi Boiler Gas Cost£130 – £190
Thermal heating transfer resistance caused by 1mm–1.5mm calcium carbonate build-up on heat exchangers.
Dishwasher Salt Requirement10 – 14 kg
Essential ion-exchange resin bed regeneration salt required to avoid glass clouding and element burnout.
Tap water throughout outcode RG24 is supplied from a unified distribution network managed by South East Water. With all 4 sectors presenting an identical mineral concentration of 270 PPM, households across all 897 postcodes share uniform limescale risk profiles and identical appliance salt calibrations (H04 – H05).
Frequently Asked Questions: Water in Outcode RG24
Q: What is the average water hardness in outcode RG24?
Tap water across outcode RG24 averages 270 PPM (mg/L), which equals 18.9° Clark, 27.0°fH, or 15.1°dH. It is officially classified as hard water water supplied by South East Water.
Q: Is water in RG24 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 270 PPM, water in outcode RG24 is 35% harder than the national benchmark.
Q: What dishwasher salt setting is recommended for RG24?
For Bosch, Siemens, and Neff dishwashers in outcode RG24 (270 PPM), the recommended softener setting is H04 – H05.
Q: Who manages the municipal water supply in outcode RG24?
Public tap water infrastructure across all 4 sectors in outcode RG24 is distributed and monitored by South East Water.
All Postcode Sectors in RG24
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.