Official Supplier Data: Southern Water • DWI & BS 7593 Standards
Water Hardness in PO39
Official water quality verdict for outcode PO39: classified as Hard Water (280 PPM), supplied and treated by Southern Water across 1 sectors.
Rating: Hard Water280 PPM • 19.6° ClarkSupplier: Southern Water+40% above UK average
Outcode Mean Hardness280 PPM19.6° Clark • Hard Water28.0°fH • 15.7°dH
Outcode PO39 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode PO39 is officially classified as hard water, averaging 280 PPM (mg/L CaCO₃) or 19.6° Clark, supplied and treated by Southern Water across all 1 postcode sectors (117 postcodes). Readings range from 280 PPM (PO39 0) to 280 PPM (PO39 0) with consistent mineral levels throughout.
☕ Kettle & Tea Quality:
Rapid limescale buildup in kettles with floating scum on your cuppa. Descale monthly using white vinegar or food-grade citric acid.
🚿 Skin & Bathing:
High calcium levels can aggravate dry skin & eczema sensitivity. Soap lathers less easily, often leaving a tight feeling after hot showers.
🍽️ Appliances & Salt:
Keep water softener salt topped up and calibrate dishwashers to H04 – H05. Protect combi boiler heat exchangers under BS 7593.
Local Installer Quote Network
Living in a Hard Water Zone (PO39 averages 280 PPM)? Compare Approved Local Installers
Get up to 3 free, no-obligation quotes from WRAS-approved water softener installers and heating engineers serving Southern Water.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark+40% Hardervs 200 PPM national average
If you have recently moved to PO39 or are setting up new kitchen appliances, getting your local water hardness right makes all the difference. Official water testing records from Southern Water show a baseline mineral level of 280 PPM (19.6° Clark) across PO39's 117 postcodes. That classifies this postal area as hard water, directly impacting how often you need to top up dishwasher salt and how fast heating elements fur up with scale.
Water hardness is remarkably consistent across all 1 sectors of PO39, with readings holding steady at 280 PPM from PO39 0 through to PO39 0. This uniform profile means every household on the Southern Water network in this zone shares the same appliance settings and kettle descaling routine.
The reason tap water in PO39 carries significant dissolved minerals lies in local geology. Southern Water abstracts substantial water supplies from subterranean chalk and limestone aquifers. As rainwater percolates through deep calcium-rich rock strata over decades, it dissolves natural calcium carbonate. While entirely safe and wholesome under Drinking Water Inspectorate (DWI) standards, these minerals precipitate out when heated above 60°C, leaving stubborn limescale deposits on heating coils.
With tap water averaging 280 PPM in outcode PO39, proactive limescale prevention is essential. Expect rapid limescale buildup in kettles—monthly descaling with white vinegar or food-grade citric acid crystals keeps the heating base efficient and stops chalky flakes falling into your tea. Combi boiler heat exchangers are also susceptible to scale encrustation, which can increase annual gas heating bills by 10% – 15% without inline scale protection under British Standard BS 7593.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode PO39
Based on 280 PPM mineral saturation (Hard Water), operating heating appliances across PO39's 117 households carries distinct annual economic consequences:
Extra Combi Boiler Gas Cost£130 – £190
Thermal heating transfer resistance caused by 1mm–1.5mm calcium carbonate build-up on heat exchangers.
Dishwasher Salt Requirement10 – 14 kg
Essential ion-exchange resin bed regeneration salt required to avoid glass clouding and element burnout.
Tap water throughout outcode PO39 is supplied from a unified distribution network managed by Southern Water. With sector PO39 0 presenting an identical mineral concentration of 280 PPM, households across all 117 postcodes share uniform limescale risk profiles and identical appliance salt calibrations (H04 – H05).
Frequently Asked Questions: Water in Outcode PO39
Q: What is the average water hardness in outcode PO39?
Tap water across outcode PO39 averages 280 PPM (mg/L), which equals 19.6° Clark, 28.0°fH, or 15.7°dH. It is officially classified as hard water water supplied by Southern Water.
Q: Is water in PO39 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 280 PPM, water in outcode PO39 is 40% harder than the national benchmark.
Q: What dishwasher salt setting is recommended for PO39?
For Bosch, Siemens, and Neff dishwashers in outcode PO39 (280 PPM), the recommended softener setting is H04 – H05.
Q: Who manages the municipal water supply in outcode PO39?
Public tap water infrastructure across all 1 sectors in outcode PO39 is distributed and monitored by Southern Water.
All Postcode Sectors in PO39
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.