Official water quality verdict for outcode HR4: classified as Moderately Hard Water (150 PPM), supplied and treated by Severn Trent / Hafren Dyfrdwy across 4 sectors.
Rating: Moderately Hard Water150 PPM • 10.5° ClarkSupplier: Severn Trent / Hafren Dyfrdwy-25% below UK average
Outcode Mean Hardness150 PPM10.5° Clark • Moderately Hard Water15.0°fH • 8.4°dH
Outcode HR4 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode HR4 is officially classified as moderately hard water, averaging 150 PPM (mg/L CaCO₃) or 10.5° Clark, supplied and treated by Severn Trent / Hafren Dyfrdwy across all 4 postcode sectors (946 postcodes). Readings range from 150 PPM (HR4 0) to 150 PPM (HR4 9) with consistent mineral levels throughout.
☕ Kettle & Tea Quality:
Gradual chalky ring forms in kettles over 2–3 months. Descale quarterly with citric acid crystals to keep heating elements clean.
🚿 Skin & Bathing:
Moderate mineral content is generally gentle on skin, producing normal lather with everyday soaps and shampoos.
🍽️ Appliances & Salt:
Set dishwashers to H02 – H03 to avoid cloudy glassware, and check boiler inhibitor levels at your annual service.
Local Installer Quote Network
Protect Your Heating & Appliances in HR4 (150 PPM): Compare Local Specialists
Connect with certified local plumbers for limescale management and British Standard BS 7593 heating system protection in Severn Trent / Hafren Dyfrdwy.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark-25% Softervs 200 PPM national average
If you have recently moved to HR4 or are setting up new kitchen appliances, getting your local water hardness right makes all the difference. Official water testing records from Severn Trent / Hafren Dyfrdwy show a baseline mineral level of 150 PPM (10.5° Clark) across HR4's 946 postcodes. That classifies this postal area as moderately hard water, directly impacting how often you need to top up dishwasher salt and how fast heating elements fur up with scale.
Water hardness is remarkably consistent across all 4 sectors of HR4, with readings holding steady at 150 PPM from HR4 0 through to HR4 9. This uniform profile means every household on the Severn Trent / Hafren Dyfrdwy network in this zone shares the same appliance settings and kettle descaling routine.
Supplies across HR4 are managed by Severn Trent / Hafren Dyfrdwy through a balanced mix of lowland river abstraction and regional storage reservoirs. Water hardness fluctuates moderately between wet winter periods and dry summer months, averaging 150 PPM across all 946 local postcodes under strict Drinking Water Inspectorate (DWI) compliance.
Households across HR4's 946 postcodes experience manageable mineral levels. While heating efficiency losses remain mild (4% – 7%), routine descaling of steam irons and thermostatic shower cartridges prevents gradual mineral clogging.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode HR4
Based on 150 PPM mineral saturation (Moderately Hard Water), operating heating appliances across HR4's 946 households carries distinct annual economic consequences:
Tap water throughout outcode HR4 is supplied from a unified distribution network managed by Severn Trent / Hafren Dyfrdwy. With all 4 sectors presenting an identical mineral concentration of 150 PPM, households across all 946 postcodes share uniform limescale risk profiles and identical appliance salt calibrations (H02 – H03).
Frequently Asked Questions: Water in Outcode HR4
Q: What is the average water hardness in outcode HR4?
Tap water across outcode HR4 averages 150 PPM (mg/L), which equals 10.5° Clark, 15.0°fH, or 8.4°dH. It is officially classified as moderately hard water water supplied by Severn Trent / Hafren Dyfrdwy.
Q: Is water in HR4 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 150 PPM, water in outcode HR4 is 25% softer than the national benchmark.
Q: What dishwasher salt setting is recommended for HR4?
For Bosch, Siemens, and Neff dishwashers in outcode HR4 (150 PPM), the recommended softener setting is H02 – H03.
Q: Who manages the municipal water supply in outcode HR4?
Public tap water infrastructure across all 4 sectors in outcode HR4 is distributed and monitored by Severn Trent / Hafren Dyfrdwy.
All Postcode Sectors in HR4
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.