Official Supplier Data: SES Water • DWI & BS 7593 Standards
Water Hardness in CR2
Official water quality verdict for outcode CR2: classified as Hard Water (267.5 PPM), supplied and treated by SES Water across 6 sectors.
Rating: Hard Water267.5 PPM • 18.7° ClarkSupplier: SES Water+34% above UK average
Outcode Mean Hardness267.5 PPM18.7° Clark • Hard Water26.8°fH • 15.0°dH
Outcode CR2 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode CR2 is officially classified as hard water, averaging 267.5 PPM (mg/L CaCO₃) or 18.7° Clark, supplied and treated by SES Water across all 6 postcode sectors (996 postcodes). Readings range from 260 PPM (CR2 0) to 275 PPM (CR2 7), showing a local disparity of 15 PPM.
☕ Kettle & Tea Quality:
Rapid limescale buildup in kettles with floating scum on your cuppa. Descale monthly using white vinegar or food-grade citric acid.
🚿 Skin & Bathing:
High calcium levels can aggravate dry skin & eczema sensitivity. Soap lathers less easily, often leaving a tight feeling after hot showers.
🍽️ Appliances & Salt:
Keep water softener salt topped up and calibrate dishwashers to H04 – H05. Protect combi boiler heat exchangers under BS 7593.
Local Installer Quote Network
Living in a Hard Water Zone (CR2 averages 267.5 PPM)? Compare Approved Local Installers
Get up to 3 free, no-obligation quotes from WRAS-approved water softener installers and heating engineers serving SES Water.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark+34% Hardervs 200 PPM national average
Statistical distribution across all 6 postcode sectors and 996 delivery points under SES Water's catchment monitoring:
Analyzed Sectors6996 postcodes
PPM Spread (Min - Max)260 – 275Variance: 15 PPM
Predominant ZoneHard Water100% hard/very hard
Regulating AuthoritySES WaterDWI Regulated Supply
Hydro Metric
Outcode CR2 Level
UK National Reference
Regional Status
Mean Mineral Density
267.5 PPM (18.7 °Clark)
200 PPM (14.0 °Clark)
+34% above baseline
French & German Scale
26.8 °fH / 15.0 °dH
20.0 °fH / 11.2 °dH
European standard conversion
Catchment Uniformity
Variable (15 PPM disparity)
Regional blending standard
6 Sub-catchments
Dishwasher Salt Calibration
H04 – H05
Bosch H03 / Beko Level 2
Salt required
Regional Hydro-Geological Overview
Water Hardness Breakdown: Outcode CR2
Water hardness isn't identical across every street in CR2—there is a 15 PPM variance between neighborhoods. Residents in sector CR2 0 enjoy the softest water at 260 PPM, whereas taps in sector CR2 7 register the highest mineral load at 275 PPM. This localized disparity occurs because SES Water blends supplies from different boreholes, rivers, and storage reservoirs depending on elevation and seasonal demand.
Treated in strict compliance with Drinking Water Inspectorate (DWI) standards, tap water in CR2 maintains an average mineral density of 267.5 PPM, ensuring consistent municipal distribution and wholesome tap drinking water from SES Water.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode CR2
Based on 267.5 PPM mineral saturation (Hard Water), operating heating appliances across CR2's 996 households carries distinct annual economic consequences:
Extra Combi Boiler Gas Cost£130 – £190
Thermal heating transfer resistance caused by 1mm–1.5mm calcium carbonate build-up on heat exchangers.
Dishwasher Salt Requirement10 – 14 kg
Essential ion-exchange resin bed regeneration salt required to avoid glass clouding and element burnout.
Q: What is the average water hardness in outcode CR2?
Tap water across outcode CR2 averages 267.5 PPM (mg/L), which equals 18.7° Clark, 26.8°fH, or 15.0°dH. It is officially classified as hard water water supplied by SES Water.
Q: Is water in CR2 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 267.5 PPM, water in outcode CR2 is 34% harder than the national benchmark.
Q: What dishwasher salt setting is recommended for CR2?
For Bosch, Siemens, and Neff dishwashers in outcode CR2 (267.5 PPM), the recommended softener setting is H04 – H05.
Q: Who manages the municipal water supply in outcode CR2?
Public tap water infrastructure across all 6 sectors in outcode CR2 is distributed and monitored by SES Water.
All Postcode Sectors in CR2
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.