Official Supplier Data: Anglian Water • DWI & BS 7593 Standards
Water Hardness in CO11
Official water quality verdict for outcode CO11: classified as Hard Water (296.7 PPM), supplied and treated by Anglian Water across 3 sectors.
Rating: Hard Water296.7 PPM • 20.8° ClarkSupplier: Anglian Water+48% above UK average
Outcode Mean Hardness296.7 PPM20.8° Clark • Hard Water29.7°fH • 16.6°dH
Outcode CO11 Household Water Quality Verdict & Practical Advice
Domestic tap water in outcode CO11 is officially classified as hard water, averaging 296.7 PPM (mg/L CaCO₃) or 20.8° Clark, supplied and treated by Anglian Water across all 3 postcode sectors (576 postcodes). Readings range from 290 PPM (CO11 2) to 310 PPM (CO11 1), showing a local disparity of 20 PPM.
☕ Kettle & Tea Quality:
Rapid limescale buildup in kettles with floating scum on your cuppa. Descale monthly using white vinegar or food-grade citric acid.
🚿 Skin & Bathing:
High calcium levels can aggravate dry skin & eczema sensitivity. Soap lathers less easily, often leaving a tight feeling after hot showers.
🍽️ Appliances & Salt:
Keep water softener salt topped up and calibrate dishwashers to H04 – H05. Protect combi boiler heat exchangers under BS 7593.
Local Installer Quote Network
Living in a Hard Water Zone (CO11 averages 296.7 PPM)? Compare Approved Local Installers
Get up to 3 free, no-obligation quotes from WRAS-approved water softener installers and heating engineers serving Anglian Water.
Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark+48% Hardervs 200 PPM national average
Water hardness isn't identical across every street in CO11—there is a 20 PPM variance between neighborhoods. Residents in sector CO11 2 enjoy the softest water at 290 PPM, whereas taps in sector CO11 1 register the highest mineral load at 310 PPM. This localized disparity occurs because Anglian Water blends supplies from different boreholes, rivers, and storage reservoirs depending on elevation and seasonal demand.
The reason tap water in CO11 carries significant dissolved minerals lies in local geology. Anglian Water abstracts substantial water supplies from subterranean chalk and limestone aquifers. As rainwater percolates through deep calcium-rich rock strata over decades, it dissolves natural calcium carbonate. While entirely safe and wholesome under Drinking Water Inspectorate (DWI) standards, these minerals precipitate out when heated above 60°C, leaving stubborn limescale deposits on heating coils.
Estimated Annual Household Financial Impact
Limescale & Appliance Operating Costs in Outcode CO11
Based on 296.7 PPM mineral saturation (Hard Water), operating heating appliances across CO11's 576 households carries distinct annual economic consequences:
Extra Combi Boiler Gas Cost£130 – £190
Thermal heating transfer resistance caused by 1mm–1.5mm calcium carbonate build-up on heat exchangers.
Dishwasher Salt Requirement10 – 14 kg
Essential ion-exchange resin bed regeneration salt required to avoid glass clouding and element burnout.
Q: What is the average water hardness in outcode CO11?
Tap water across outcode CO11 averages 296.7 PPM (mg/L), which equals 20.8° Clark, 29.7°fH, or 16.6°dH. It is officially classified as hard water water supplied by Anglian Water.
Q: Is water in CO11 harder than the UK national average?
The UK baseline average is approximately 200 PPM. At 296.7 PPM, water in outcode CO11 is 48% harder than the national benchmark.
Q: What dishwasher salt setting is recommended for CO11?
For Bosch, Siemens, and Neff dishwashers in outcode CO11 (296.7 PPM), the recommended softener setting is H04 – H05.
Q: Who manages the municipal water supply in outcode CO11?
Public tap water infrastructure across all 3 sectors in outcode CO11 is distributed and monitored by Anglian Water.
All Postcode Sectors in CO11
Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.