Official Supplier Data: Severn Trent / Hafren Dyfrdwy • DWI & BS 7593 Standards

Water Hardness in CH5

Official water quality verdict for outcode CH5: classified as Moderately Hard Water (148 PPM), supplied and treated by Severn Trent / Hafren Dyfrdwy across 5 sectors.

Rating: Moderately Hard Water148 PPM • 10.4° ClarkSupplier: Severn Trent / Hafren Dyfrdwy-26% below UK average
Outcode Mean Hardness148 PPM10.4° Clark • Moderately Hard Water14.8°fH • 8.3°dH
Outcode CH5 Household Water Quality Verdict & Practical Advice

Domestic tap water in outcode CH5 is officially classified as moderately hard water, averaging 148 PPM (mg/L CaCO₃) or 10.4° Clark, supplied and treated by Severn Trent / Hafren Dyfrdwy across all 5 postcode sectors (1,165 postcodes). Readings range from 140 PPM (CH5 2) to 150 PPM (CH5 9), showing a local disparity of 10 PPM.

☕ Kettle & Tea Quality:

Gradual chalky ring forms in kettles over 2–3 months. Descale quarterly with citric acid crystals to keep heating elements clean.

🚿 Skin & Bathing:

Moderate mineral content is generally gentle on skin, producing normal lather with everyday soaps and shampoos.

🍽️ Appliances & Salt:

Set dishwashers to H02 – H03 to avoid cloudy glassware, and check boiler inhibitor levels at your annual service.

Local Installer Quote Network

Protect Your Heating & Appliances in CH5 (148 PPM): Compare Local Specialists

Connect with certified local plumbers for limescale management and British Standard BS 7593 heating system protection in Severn Trent / Hafren Dyfrdwy.

Verified Against British Standard BS 7593
WRAS-Approved Water Softeners
100% Free & No Obligation Quotes
vs. UK Benchmark-26% Softervs 200 PPM national average
Boiler Heat Loss4% – 7%Est. thermal heating drag
Kettle DescalingQuarterlyAppliance maintenance cycle
Comprehensive Sector Data Aggregation

Outcode CH5 Water Quality & Mineral Profile

Statistical distribution across all 5 postcode sectors and 1,165 delivery points under Severn Trent / Hafren Dyfrdwy's catchment monitoring:

Analyzed Sectors51,165 postcodes
PPM Spread (Min - Max)140 – 150Variance: 10 PPM
Predominant ZoneModerately Hard Water0% hard/very hard
Regulating AuthoritySevern Trent / Hafren DyfrdwyDWI Regulated Supply
Hydro MetricOutcode CH5 LevelUK National ReferenceRegional Status
Mean Mineral Density148 PPM (10.4 °Clark)200 PPM (14.0 °Clark)-26% below baseline
French & German Scale14.8 °fH / 8.3 °dH20.0 °fH / 11.2 °dHEuropean standard conversion
Catchment UniformityVariable (10 PPM disparity)Regional blending standard5 Sub-catchments
Dishwasher Salt CalibrationH02 – H03Bosch H03 / Beko Level 2Salt required
Regional Hydro-Geological Overview

Water Hardness Breakdown: Outcode CH5

If you have recently moved to CH5 or are setting up new kitchen appliances, getting your local water hardness right makes all the difference. Official water testing records from Severn Trent / Hafren Dyfrdwy show a baseline mineral level of 148 PPM (10.4° Clark) across CH5's 1,165 postcodes. That classifies this postal area as moderately hard water, directly impacting how often you need to top up dishwasher salt and how fast heating elements fur up with scale.

Water hardness isn't identical across every street in CH5—there is a 10 PPM variance between neighborhoods. Residents in sector CH5 2 enjoy the softest water at 140 PPM, whereas taps in sector CH5 9 register the highest mineral load at 150 PPM. This localized disparity occurs because Severn Trent / Hafren Dyfrdwy blends supplies from different boreholes, rivers, and storage reservoirs depending on elevation and seasonal demand.

Supplies across CH5 are managed by Severn Trent / Hafren Dyfrdwy through a balanced mix of lowland river abstraction and regional storage reservoirs. Water hardness fluctuates moderately between wet winter periods and dry summer months, averaging 148 PPM across all 1,165 local postcodes under strict Drinking Water Inspectorate (DWI) compliance.

Households across CH5's 1,165 postcodes experience manageable mineral levels. While heating efficiency losses remain mild (4% – 7%), routine descaling of steam irons and thermostatic shower cartridges prevents gradual mineral clogging.

Estimated Annual Household Financial Impact

Limescale & Appliance Operating Costs in Outcode CH5

Based on 148 PPM mineral saturation (Moderately Hard Water), operating heating appliances across CH5's 1,165 households carries distinct annual economic consequences:

Extra Combi Boiler Gas Cost£40 – £80

Negligible heat exchanger limescale layer; boilers maintain optimal seasonal fuel efficiency.

Dishwasher Salt Requirement4 – 8 kg

Soft water requires minimal or zero softener regeneration salt, cutting annual consumable costs.

Heating Element Degradation4% – 7% thermal drag

Minor scale accumulation over 3–5 operating years.

Regional Comparison

Curious how outcode CH5 compares?

See how the hardest sector in CH5 (CH5 9) compares against central London water metrics.

Compare vs London (SW1A 1)

Softest Sector in CH5

Lowest mineral concentration

Softest
Sector CH5 2265 Postcodes • Moderately Hard
140 PPM9.8 °Clark

Hardest Sector in CH5

Highest mineral concentration

Highest Hardness
Sector CH5 916 Postcodes • Moderately Hard
150 PPM10.5 °Clark

Frequently Asked Questions: Water in Outcode CH5

Q: What is the average water hardness in outcode CH5?

Tap water across outcode CH5 averages 148 PPM (mg/L), which equals 10.4° Clark, 14.8°fH, or 8.3°dH. It is officially classified as moderately hard water water supplied by Severn Trent / Hafren Dyfrdwy.

Q: Is water in CH5 harder than the UK national average?

The UK baseline average is approximately 200 PPM. At 148 PPM, water in outcode CH5 is 26% softer than the national benchmark.

Q: What dishwasher salt setting is recommended for CH5?

For Bosch, Siemens, and Neff dishwashers in outcode CH5 (148 PPM), the recommended softener setting is H02 – H03.

Q: Who manages the municipal water supply in outcode CH5?

Public tap water infrastructure across all 5 sectors in outcode CH5 is distributed and monitored by Severn Trent / Hafren Dyfrdwy.

All Postcode Sectors in CH5

Select a postcode sector below to view exact water softener salt settings, limescale protection guides, and appliance recommendations.