Water Hardness in Sector BA14 9

Water Supply Zone Report • Distribution Area Managed by Wessex Water

Water Quality Summary: Sector BA14 9

✓ Verified Zone-Level Data (DWI / Defra)
Average Mineral PPM290 PPMHard
English Clark Scale20.3 °Clark29.0 °fH • 16.2 °dH
Boiler Heat Loss10% – 15%Est. thermal efficiency drag
Bosch Dishwasher SettingH04Softener salt required
Direct Answer & Quick Diagnostic

Tap water in postcode sector BA14 9 has an average water hardness of 290 PPM (mg/L CaCO₃), which equals 20.3° Clark (29.0°fH / 16.2°dH). Classified as hard water distributed by Wessex Water, domestic dishwashers require setting H04 and combi boilers face an estimated thermal efficiency drag of 10% – 15% without scale protection.

Comprehensive Hydro-Geological Analysis

Water Hardness Breakdown for Sector BA14 9

For residents configuring home appliances or monitoring water quality in BA14 9, environmental supply metrics from Wessex Water show a dissolved mineral density of 290 PPM. Spanning 240 local postcodes, the mains tap water supply presents a consistent hard profile.

Because water supplied by Wessex Water in BA14 9 contains 290 PPM of dissolved minerals, limescale accumulation is an active maintenance factor. Taps, thermostatic shower cartridges, and boiler coils require periodic descaling to prevent flow constriction.

Water quality in BA14 9 is monitored continuously under the Water Supply (Water Quality) Regulations. Environmental testing ensures that the 290 PPM mineral density supplied by Wessex Water remains compliant with all Drinking Water Inspectorate (DWI) parameters.

Bathing and laundering across the 240 postcodes of BA14 9 is influenced by the 290 PPM mineral density. Surfactants in shampoos and detergents interact with calcium salts, requiring +35% extra laundry detergent to overcome calcium neutralization to achieve thorough cleansing and preserve fabric softness.

Correct softener regeneration is critical when running appliances on 290 PPM water in BA14 9. Setting your dishwasher to H04 optimizes salt consumption while ensuring spot-free drying results across BA14.

Standardized Water Chemistry Metrics

Water Hardness Measurement Conversions for Sector BA14 9

Standardised unit equivalents used across British plumbing standards (BS 7593), European appliance manuals, and water testing:

Measurement ScaleSymbol / StandardValue in BA14 9
Parts Per Million (UK/US standard)PPM / mg/L CaCO₃290 PPM
English Clark Degrees°Clark / °e20.3 °Clark
French Degrees°fH29.0 °fH
German Degrees (General Hardness)°dH / dGH16.2 °dH
Millimoles Per Litremmol/L2.90 mmol/L
Grains Per Gallon (US)gpg16.9 gpg
NP
Updated: 3 September 2025 • DWI & Defra Compliant DataNguyễn Hạc Phong • Lead Water Data Engineer
Drinking Water Inspectorate (DWI)
Water Hardness Level

290 PPM (mg/L)

20.3 °ClarkHard
0 PPM (Soft)100 PPM200 PPM (Hard)300+ PPM (Very Hard)
Water supplied by Wessex Water in BA14 9 is categorized as Hard. High mineral content causes rapid limescale build-up on heating elements and appliances.
Dishwasher Setup Guide

Exact Water Softener Setting for BA14 9

Select your dishwasher brand to get the manufacturer-recommended salt setting for this area.

Recommended Setting:H04
⚠️ Dishwasher salt is required to prevent cloudy glasses and internal scale buildup.
Boiler Efficiency Loss~12%Extra energy cost per year
Limescale Formation RiskHighOn taps, kettles & showers
Detergent Needed+30% DoseFor laundry & dishwashing
Recommended Solutions

Protect Your Appliances in BA14 9

Essential

Dishwasher Regeneration Salt

Prevents limescale buildup in water softeners and stops cloudy film on glassware.

Check Price on Amazon
Skin & Hair Protection

Shower Head Water Filter

Reduces chlorine & hard minerals to protect against dry skin, eczema, and hair damage.

Check Shower Filters
Maintenance

Appliance Descaler Tablets

Quickly dissolves limescale deposits inside kettles, coffee machines, and washing machines.

View Descalers
Frequently Asked Questions

Water Hardness FAQs for Sector BA14 9

Q: What is the official water hardness level in sector BA14 9?

Tap water in sector BA14 9 has an average mineral density of 290 PPM (mg/L), which equals 20.3° Clark, 29.0°fH, or 16.2°dH. It is officially categorized as hard water supplied by Wessex Water.

Q: What dishwasher water softener setting is needed for BA14 9?

For Bosch, Siemens, and Neff dishwashers in sector BA14 9 (290 PPM), the recommended softener setting is H04. Beko models typically require Level 3 or 4.

Q: Will hard water damage central heating boilers in BA14 9?

Yes. At 290 PPM, calcium carbonate precipitation will build scale layers on heating elements over time, potentially reducing boiler heat transfer efficiency by 10% – 15% without proper filtration or descaling.

Q: Who is the regulated water supplier for sector BA14 9?

Mains water across postcode sector BA14 9 is distributed and monitored by Wessex Water in accordance with Drinking Water Inspectorate (DWI) quality standards.

Other Postcode Sectors in BA14

Explore water hardness and limescale risks in neighbouring areas within BA14

Sector BA14 0290 PPM (Hard)
Sector BA14 4290 PPM (Hard)
Sector BA14 6290 PPM (Hard)
Sector BA14 7290 PPM (Hard)
Sector BA14 8290 PPM (Hard)

Curious how Sector BA14 9 compares?

Compare your local mineral PPM, boiler efficiency risks, and appliance settings directly against Central London (SW1A 1).

Compare vs London (SW1A 1) →