Side-by-Side Water Hardness Calculator

Compare Water Hardness

Analyze real-time PPM, Clark degrees, limescale risk, and dishwasher salt settings between any two UK postcode sectors.

Water Quality Comparison Analysis

Executive Summary: Sector LE19 3 vs Sector SW1A 1

Comparing tap water mineral concentration between Sector LE19 3 (Severn Trent Water) and Sector SW1A 1 (Thames Water) reveals a water hardness difference of 115 PPM. Sector LE19 3 has softer water at 160 PPM (Moderately Hard) compared to Sector SW1A 1 at 275 PPM (Hard).

Limescale risk and boiler heating efficiency vary based on these mineral levels. Households in Sector SW1A 1 experience higher heating element degradation and kettle scale accumulation due to elevated calcium carbonate density (275 PPM vs 160 PPM).

For home appliance setup, Bosch dishwasher water softener settings should be calibrated accordingly: Sector LE19 3 requires setting H02 whereas Sector SW1A 1 recommends setting H04.

NP

Sector LE19 3 has 115 PPM LOWER water hardness than Sector SW1A 1

Lower PPM indicates softer water, reduced limescale risk, and lower detergent usage.

Water Metric
Sector LE19 3Outcode: LE19
Sector SW1A 1Outcode: SW1A
Hardness (PPM)
160 PPM
275 PPM
Clark Degrees
11.2 °Clark
19.3 °Clark
Classification
Moderately Hard
Hard
Bosch Salt Setting
H02
H04
Water Supplier
Severn Trent Water
Thames Water
Postcodes Covered
105 postcodes
66 postcodes