Side-by-Side Water Hardness Calculator

Compare Water Hardness Between Areas

Analyze real-time PPM, Clark degrees, limescale risk, and dishwasher salt settings between any two UK postcode sectors.

Water Quality Comparison Analysis

Executive Summary: Sector HU3 1 vs Sector SW1A 1

Comparing tap water mineral concentration between Sector HU3 1 (Yorkshire Water) and Sector SW1A 1 (Thames Water) reveals a water hardness difference of 40 PPM. Sector SW1A 1 has softer water at 275 PPM (Hard) compared to Sector HU3 1 at 315 PPM (Very Hard).

Limescale risk and boiler heating efficiency vary based on these mineral levels. Households in Sector HU3 1 experience higher heating element degradation and kettle scale accumulation due to elevated calcium carbonate density (315 PPM vs 275 PPM).

For home appliance setup, Bosch dishwasher water softener settings should be calibrated accordingly: Sector HU3 1 requires setting H06 / H07 whereas Sector SW1A 1 recommends setting H04.

NP

Sector SW1A 1 has 40 PPM LOWER water hardness than Sector HU3 1

Lower PPM indicates softer water, reduced limescale risk, and lower detergent usage.

Water Metric
Sector HU3 1Outcode: HU3
Sector SW1A 1Outcode: SW1A
Hardness (PPM)
315 PPM
275 PPM
Clark Degrees
22 °Clark
19.3 °Clark
Classification
Very Hard
Hard
Bosch Salt Setting
H06 / H07
H04
Water Supplier
Yorkshire Water
Thames Water
Postcodes Covered
138 postcodes
66 postcodes